BFZGL - MIL-C-22750C EPOXY POLYAMIDE CLEAR
- MSDS: BFZGL
- Manufacturer: ADVANCED PRODUCTS DBA ADVANCED COATINGS AND CHEMICAL
- Product Name: MIL-C-22750C EPOXY POLYAMIDE CLEAR
- National Stock Number: 8010-00-959-5661
Product Identification
Product ID:MIL-C-22750C EPOXY POLYAMIDE CLEAR
MSDS Date:01/01/1987
FSC:8010
NIIN:00-959-5661
MSDS Number: BFZGL
Responsible Party
TEMPLE CITY, CA 91780-4229
US
Emergency Phone: 213-579-6270
Info Phone: 213-579-6270
Cage: 51686
Contractor
Telephone: 818-579-6270
Cage: 51686
Ingredients
CATALYST
Fraction By Weight: 18.79%
VEHICLE
Fraction By Weight: 28.56%
SOLVENTS
Fraction By Weight: 52.24%
ADDITIVES
Fraction By Weight: 0.41%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ANESTHETIC. MAY CAUSE SKIN & EYE
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, NAUSEA, DIZZINESS.
First Aid
First Aid:EYES/SKIN: FLUSH W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:41-45FC
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:AVOID OPEN FLAMES/SPARK SOURCES. PROVIDE
ADEQUATE VENTILATION.
Handling
Handling and Storage Precautions:STORE IN SEALED CONTAINERS. AVOID OPEN
FLAMES & SPARKS. AVOID SPLASH FILLING. AVOID CONTACT W/SKIN & EYES.
Exposure Controls
Respiratory Protection:WEAR AN ORGANIC MASK.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL): CLASS D
APPROVED MOTORS & SWITCHES.
Protective Gloves:NEOPRENE RUBBER
Eye Protection:REQUIRED
Supplemental Safety and Health
Chemical Properties
Spec Gravity:0.97
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR
Percent Volatiles by Volume:52.24
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAMES & SPARKS.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:EVAPORATE/FLUSH W/WATER TO OPEN WELL-VENTILATED
AREA IAW/FEDERAL, STATE & LOCAL REGULATIONS. USE OIL SEWER IF
AVAILABLE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.